The steam turbine vibration monitoring and diagnosis system is an important industrial device monitoring technology. Its main purpose is to monitor and diagnose the vibration status of the steam turbine in real time to ensure the safe operation of the equipment, improve operational efficiency and ex

Ⅰ. What are the types of turbine monitoring systems?A turbine monitoring system is a device and software system used to monitor and manage the operating status of a turbine. These systems are designed to improve the reliability, efficiency, and safety of turbines, prevent failures, and perform main

From April 11 to 13, 2025, INZOC Technology (Shenzhen) Co., Ltd. was honored to be invited to attend the "Engineering Equipment Intelligent Operation and Maintenance Technology, Application and Industrialization Conference" held in Mianyang, focusing on the intelligent operation and mainte

Oil water contamination is mainly formed under harsh environmental conditions, improper operation or equipment damage. Possible reasons include poor equipment sealing, exposure to high humidity environment, and intrusion of rain or water vapor into the oil during transportation, storage or use. Wate

Industrial lubricants play an important role in equipment, mainly preventing friction and wear by reducing the friction coefficient, preventing direct contact between metal surfaces, and providing effective lubricating films. Its components include base oils and additives. The base oil provides lubr

What is lubricant degradation? Lubricant degradation refers to the process in which lubricants gradually lose their original properties and chemical composition due to factors such as heat, oxidation, pollution or chemical reactions during use. This will lead to increased viscosity of the lubricant,

Ⅰ. What are the aspects of lubricant quality testing?Lubricant quality testing involves many aspects, mainly including the following aspects:1. Viscosity: The viscosity of lubricating oil refers to its fluidity and viscosity, which is usually tested at different temperatures to ensure that it can p

I. What are the causes of low lubricating oil pressure in marine gearboxes?Answer: The causes include insufficient oil flow, problems with the lubricating oil pump, excessively high oil viscosity, oil leakage, filter blockage, oil contamination, internal system failures, low liquid level, hydraulic

Wind power lubricant testing is the process of testing and analyzing the lubricant used in wind turbines. The main purpose is to analyze the chemical and physical properties of internal lubricant samples to determine the health of the oil. Testing can include measuring the